
RIB ROASTS
BONE-IN & BONELESS
Cooking Instructions, Tips & Tricks
Beef Doneness Temperature Guide:
Rare: 120–125°F
Medium Rare: 130–135°F ⭐ Butcher's Favorite
Medium: 140–145°F
Medium Well: 150–155°F
Well Done: 160°F+
BUTCHER'S TIP: Always use a meat thermometer! Beef continues cooking after being removed from the heat. Allow for carryover cooking when planning your final temperature.

BONE-IN RIB ROAST
TRADITIONAL OVEN ROASTING
Recommended Oven Temperature: 450°F initially, then 325°F
STEP 1: Preheat oven to 450°F.
STEP 2: Remove the rib roast from its packaging and pat dry with paper towels.
STEP 3: Generously season all sides with Stone Cold Meats' Oak Smoked SPG Seasoning. We recommend approximately 1 oz of seasoning per pound of beef.
STEP 4: Place the roast bone-side down in a shallow roasting pan. The bones act as a natural roasting rack.
STEP 5: Roast at 450°F for approximately 15 minutes to develop a flavorful crust.
STEP 6: Reduce oven temperature to 325°F and continue roasting.
STEP 7: Insert a meat thermometer into the thickest part of the roast, avoiding the bones.
STEP 8: Continue cooking until the roast reaches your desired internal temperature, accounting for additional temperature rise during resting.
STEP 9: Remove from oven and allow to rest approximately 20–30 minutes before carving.
HOW TO CARVE YOUR BONE-IN RIB ROAST
Our butchers have already removed the rib bones and tied them back onto your roast for easier carving!
STEP 1: After resting, carefully cut and remove the butcher's twine.
STEP 2: Lift the roast away from the rib bones.
STEP 3: Place the boneless portion on a cutting board.
STEP 4: Slice against the grain into your preferred thickness.
STEP 5: Serve the rib bones separately or save them for another delicious meal!
BUTCHER'S TIP: Leave the bones tied onto the roast during cooking. They help support the meat and create a beautiful holiday presentation.
REVERSE-SEAR METHOD
Recommended Oven Temperature: 250°F, followed by 475–500°F
STEP 1: Preheat oven to 250°F.
STEP 2: Remove roast from packaging and pat dry.
STEP 3: Season generously with Stone Cold Meats' Oak Smoked SPG Seasoning, using approximately 1 oz per pound of beef.
STEP 4: Place the roast bone-side down in a shallow roasting pan.
STEP 5: Insert an oven-safe meat thermometer into the thickest part, avoiding the bones.
STEP 6: Roast slowly until the internal temperature approaches your desired doneness.
STEP 7: Remove the roast approximately 10–15°F below your intended final temperature.
STEP 8: Increase oven temperature to 475–500°F.
STEP 9: Return roast to the oven for approximately 5–10 minutes to develop a beautifully browned crust.
STEP 10: Remove when the roast reaches your desired final internal temperature.
STEP 11: Rest approximately 20–30 minutes before carving.
BUTCHER'S TIP: Reverse searing is an excellent method for larger bone-in rib roasts because it promotes even cooking throughout the meat while creating a flavorful crust.
SMOKING INSTRUCTIONS
STEP 1: PREHEAT YOUR SMOKER. Set your smoker to 225–250°F. We recommend oak for traditional Texas smoke flavor, pecan for a milder taste, or hickory for a bolder finish.
STEP 2: PREPARE YOUR ROAST. Remove the roast from packaging and pat dry with paper towels. Leave the rib bones tied in place throughout smoking.
STEP 3: SEASON GENEROUSLY. Apply Stone Cold Meats' Oak Smoked SPG Seasoning evenly to all sides of the roast. We recommend approximately 1 oz per pound of beef.
STEP 4: PLACE IN THE SMOKER. Position the roast bone-side down directly on the smoker grate. The bones help support the roast during cooking.
STEP 5: INSERT A MEAT THERMOMETER. Place a probe thermometer into the thickest part of the beef, avoiding the rib bones.
STEP 6: SMOKE LOW AND SLOW. Maintain a consistent smoker temperature of 225–250°F. Smoke until the roast approaches your desired internal temperature.
STEP 7: PREPARE FOR THE FINAL SEAR. If using a high-heat finish, remove the roast approximately 10–15°F below your intended final temperature.
STEP 8: SEAR FOR A FLAVORFUL CRUST. Increase smoker or grill temperature to 450–500°F. Return the roast to high heat for approximately 5–10 minutes, watching carefully to prevent burning.
STEP 9: CHECK THE TEMPERATURE. Remove once the roast reaches your desired final internal temperature.
STEP 10: REST BEFORE CARVING. Allow the roast to rest approximately 20–30 minutes.
ESTIMATED SMOKING TIME
At 225–250°F, plan approximately 30–40 minutes per pound as a starting estimate.
Actual time depends on roast thickness, size, smoker performance, and desired doneness.
BUTCHER'S TIP: Leave the bones tied onto your roast during smoking! They provide support and create that beautiful, traditional bone-in rib roast presentation.

BONELESS RIB ROAST
TRADITIONAL OVEN ROASTING
Recommended Oven Temperature: 450°F initially, then 325°F
STEP 1: Preheat oven to 450°F.
STEP 2: Remove roast from packaging and pat dry with paper towels.
STEP 3: Generously coat all sides with Stone Cold Meats' Oak Smoked SPG Seasoning. We recommend approximately 1 oz of seasoning per pound of beef.
STEP 4: Place fat-side up on a roasting rack inside a shallow roasting pan.
STEP 5: Roast at 450°F for approximately 15 minutes to develop a flavorful crust.
STEP 6: Reduce oven temperature to 325°F.
STEP 7: Continue roasting, checking the internal temperature regularly.
STEP 8: Remove once the roast reaches your desired internal temperature, allowing for additional temperature rise during resting.
STEP 9: Rest approximately 20–30 minutes before slicing.
HOW TO CARVE YOUR BONELESS RIB ROAST
STEP 1: Allow the roast to rest before carving.
STEP 2: Remove any butcher's twine, if present.
STEP 3: Place the roast on a cutting board.
STEP 4: Slice against the grain into your preferred thickness.
STEP 5: Serve with your favorite holiday sides and sauces.
BUTCHER'S TIP: Boneless rib roasts are ideal for customers who want easy carving and uniform slices without sacrificing flavor or tenderness.
REVERSE-SEAR METHOD
Recommended Oven Temperature: 250°F, followed by 475–500°F
STEP 1: Preheat oven to 250°F.
STEP 2: Remove roast from packaging and pat dry.
STEP 3: Season generously with Stone Cold Meats' Oak Smoked SPG Seasoning, using approximately 1 oz per pound of beef.
STEP 4: Place fat-side up on a roasting rack inside a shallow roasting pan.
STEP 5: Insert an oven-safe thermometer into the thickest part of the roast.
STEP 6: Roast slowly until the internal temperature approaches your desired doneness.
STEP 7: Remove approximately 10–15°F below your intended final temperature.
STEP 8: Increase oven temperature to 475–500°F.
STEP 9: Return roast to the oven for approximately 5–10 minutes to develop a golden-brown crust.
STEP 10: Remove when the roast reaches your desired final temperature.
STEP 11: Rest approximately 20–30 minutes before carving.
BUTCHER'S TIP: Reverse searing gives boneless rib roasts a beautifully browned exterior with more even doneness from edge to center.
SMOKING INSTRUCTIONS
STEP 1: PREHEAT YOUR SMOKER. Set your smoker to 225–250°F. Oak provides a classic Texas smoke flavor, while pecan and hickory offer delicious alternatives.
STEP 2: PREPARE YOUR ROAST. Remove the boneless roast from packaging and pat dry with paper towels. Leave any butcher's twine in place to help maintain its shape.
STEP 3: SEASON GENEROUSLY. Coat all sides with Stone Cold Meats' Oak Smoked SPG Seasoning. We recommend approximately 1 oz per pound of beef.
STEP 4: PLACE IN THE SMOKER. Position the roast fat-side up directly on the smoker grate.
STEP 5: INSERT A MEAT THERMOMETER. Place an oven-safe probe thermometer into the thickest part of the roast.
STEP 6: SMOKE LOW AND SLOW. Maintain a consistent smoker temperature of 225–250°F until the roast approaches your desired internal temperature.
STEP 7: PREPARE FOR THE FINAL SEAR. If finishing with high heat, remove the roast approximately 10–15°F below your intended final temperature.
STEP 8: SEAR FOR A BEAUTIFUL CRUST. Increase smoker or grill temperature to 450–500°F. Return the roast to high heat for approximately 5–10 minutes, rotating if necessary for even browning.
STEP 9: CHECK THE TEMPERATURE. Remove once the roast reaches your desired final internal temperature.
STEP 10: REST BEFORE SLICING. Allow the roast to rest approximately 20–30 minutes.
ESTIMATED SMOKING TIME
At 225–250°F, plan approximately 30–40 minutes per pound as a starting estimate.
Cooking times vary depending on the thickness of the roast, smoker conditions, and desired doneness.
BUTCHER'S TIP: For an incredible crust, finish your smoked Boneless Rib Roast over high heat. The combination of smoke, beautifully rendered fat, and our Oak Smoked SPG Seasoning creates exceptional flavor!